Whether it’s for relaxing after a long day, escaping your responsibilities, or ignoring the stresses of the outside world, it doesn’t get much cozier than your very own hanging chair.
But is the security they provide worth the hassle of installing them?
After all, those chairs don’t hang themselves.
The answer is, of course — especially with our quick guide to installing a hanging chair.
Let’s get started.
Here are some basics you should keep in mind before attempting to hang any type of chair.
Hanging chairs come in two styles, swing and pivot. Both are available in a hammock chair or basket chair based on your preference.
Swing-style chairs enable you to swing softly back and forth. They require two anchor points for installation, distributing weight across both points.
Pivot-style chairs allow you to gently rotate 360 degrees while you relax. These chairs only require one anchor point and can support less weight as a result.
With a good sense of the fundamentals and your chair picked out, follow this checklist of necessary items before you get started.
Now that you’ve gathered all of your gear, here’s our step-by-step guide to installing your hanging chair.
Without a doubt, a cozy corner is the most ideal spot for a hanging chair.
But it really comes down to where you have the most support (aka, a ceiling beam or joist).
So, find an area you’d like to hang your chair, then use a stud finder to locate a secure place to hang your chair.
Choose a spot that allows for at least 3 feet of space behind the chair and at least 14 inches on either side.
This will prevent the chair from hitting a wall or a railing while you drift.
Use your stud finder to locate a ceiling joist or internal beam.
Next, Limboimports.com suggests marking both sides of the joist or beam with a pencil.
Using the mount as a guide, mark the mount’s hole locations on the ceiling.
Then drill a pilot hole about 2-3 inches deep into the center mark, through the ceiling drywall, and into the joist.
Hunker.com, suggests making sure that the drill bit you use is smaller than the width of the eye screw, and holding the drill straight so that your screw will go in at a 90-degree angle.
Screw-in your S-hook or suspension plate — suspension plates often have drill holes and corresponding screws.
If you need more leverage, a socket wrench can help move the screw the final few turns.
Then tug on the mount to check for stability.
If everything holds, you’re in good shape.
Once the hanger hook is attached to the ceiling, suspend your hanging chair using the ropes or chains.
Next, adjust the chain or rope to your desired height; Housebeautiful.com recommends 18-24 inches from the ground.
Finally, apply downward pressure with both arms, or tug on the chain/rope to see if the swing holds.
No issues? Then congratulations!
You’ve installed a hanging chair.
Sit back, relax, and enjoy your cozy new space!
A hanging chair is only so cozy on its own.
These accessories will help you complete your new sanctuary with style and comfort.
Most hanging chairs come with a cushion on the seat.
Of course, one pillow isn’t enough.
By arranging pillows and cushions of different colors and textures you can personalize your cozy nook.
For an in-depth guide to mixing and matching furniture, check out our guide, “How To Mix And Match Bedroom Furniture”.
Hanging-chairs.net suggests taking hanging chair comfort to the next level with cup holders.
Now you can curl up with a hot cup of tea, an iced coffee, or a crisp glass of wine without having to worry about spills.
Blankets and quilts serve a dual purpose when it comes to hanging chairs.
First, they’re a stylish way to accent the decor of your room.
Second, they increase the comfort and security of your hanging chair by adding another layer to cocoon yourself.
Depending on how you’re sitting in your hanging chair or how high you have it off the ground, your feet may not touch the ground.
Choosing a chair with a detached footrest is an easy way to increase your range of motion and comfort.
Alternatively, placing a small ottoman in front of your hanging chair makes for a great footrest and added storage.
If you rent a home or an apartment, it's likely your landlord won’t be thrilled with you drilling holes in the ceiling (or your neighbor’s floor).
So, if you want the comfort and safety of a gently drifting hanging chair but can’t hang one in your home, what do you do?
Here are several chair styles that create the cozy, safe environment we look for in our most relaxed spaces — no tools required.
These chairs capture the look and feel of their hanging cousins but are supported by a frame on the ground.
A useful alternative, as a chair stand, can be moved around your home since they aren’t mounted to the ceiling.
An oversized chair with large arms creates a contained space that's perfect for curling up in.
Yet, its increased size created enough space to comfortably adjust your position, to spread yourself out.
A high-armed chair is a reliable alternative to capturing the enclosed, protected feeling of a hanging or egg-shaped chair.
Finally, a swivel accent chair captures the feeling of rotating in a hanging chair without having to drill any holes.
There you have it, how to install a hanging chair and some tasteful alternatives.
Hopefully, this guide helped you create a safe, cozy space wherever you live.
For more decorating tips, check out our blog at Northeastfactory direct.com.